Metric Thread
Grease Fittings
Metric threaded grease fittings can be either parallel or 1:16 tapered. The 1:16 tapered design is preferred as it seals in a mating parallel hole without the need for sealant.
These threads are defined by the 2 numbers i.e. M8 x 1. This would define an 8mm diameter thread with a 1mm pitch. The 3 common threads for grease fittings are M6 x 1, M8 x 1 and M10 x 1 which are all specified in DIN 71412.
Metric - Standard Fittings
Below are our most common Metric Thread fittings. To view the product please click the product code.
Kingfisher Code | Kingfisher Code | Kingfisher Code | Kingfisher Code | Description |
White Trivalent. RoHS REACH Compliant | Yellow Chromate. Limited Availability | 303 (A2) Stainless Steel | 316 (A4) Stainless Steel | |
M6 x 1 Straight | ||||
M6 x 1 45° | ||||
M6 x 1 90° | ||||
M6 x 1 Self Fom Straight | ||||
M8 x 1 Straight | ||||
M8 x 1 45° | ||||
M8 x 1 90° | ||||
N/A | M8 x 1 Self Form Straight | |||
M10 x 1 Straight | ||||
M10 x 1 45° | ||||
M10 x 1 90° | ||||
M10 x 1 Self Form Straight |
Some fittings are also available in 303 stainless & 316 stainless.
Please note: White Trivalent is preferred for RoHS and REACH compliance.
Not found whatyou're looking for?
Use the bar below to search the whole site, or if you still can’t find what you need, just give us a call! +44 (0)113 209 8989
Not found what you're looking for?
Use the bar below to search the whole site, or if you still can’t find what you need, just give us a call!
Not found what you were looking for? View our full range of grease fittings and other fittings on our dedicated product page here.
