Product Code: 915518
1/8″ x 27 Thread Forming Hex Headed Plug
915518
Description
1/8″ x 27 Thread Forming Hex Headed Plug. Self-forming threads can be screwed or driven into an untapped hole. The recommended size of the hole for a 1/8 x 27 thread is 9.47-9.65mm (Ref SAE J534) but can be dependent on the material.
Avoid chamfering as a sharp edge to the hole helps the thread bite.
Additional information
Angle | Straight |
---|---|
Ball Check | No |
Dimension A (Inch) | 0.31 |
Dimension A (mm) | 7.9 |
Dimension B (Inch) | 0.2 |
Dimension B (mm) | 5.1 |
Hardened | Yes |
Hole | ref. SAE J534 |
Product Type | Plug |
Material | Mild Steel |
Spanner Wrench Size | 11mm Hexagon |
Thread | 1/8 x 27 Special Taper |
Thread Type | Self-forming |
Zinc Plating | Zinc Yellow Chromate |
We're serious about support
If you need assistance in choosing the right Grease Fitting for your application or have questions regarding any of our products, please just get in touch.
Get in touchRead our FAQ
We're serious about support
If you need assistance in choosing the right Grease Fitting for your application or have questions regarding any of our products, please just get in touch.