1/8” x 27 Thread Forming 90˚ Grease Fitting
237790
Description
1/8″ x 27 Thread Forming Thread. 90° Hydraulic Grease Fitting.
Self-forming threads can be screwed or driven into an untapped hole. The recommended size of the hole for a 1/8″ x 27 thread is 9.47-9.65mm (Ref SAE J534) but can be dependent on the material.
Avoid chamfering as a sharp edge to the hole helps the thread bite.
Premium Quality Steel. Case Hardened. Zinc Plated with Trivalent Passivate. RoHS and REACH compliant.
With carbon steel ball check to prevent the ingress of dirt only. Not to be used to retain back pressure.
Stress Relieved Spring to ensure long service life.
Material Certificates are available on request.
Made exclusively in Britain. Worldwide Shipping.
Additional information
| Angle | 90 |
|---|---|
| Ball Check | Yes |
| Dimension A (Inch) | 0.77 |
| Dimension A (mm) | 19.5 |
| Dimension B (Inch) | 0.2 |
| Dimension B (mm) | 5.1 |
| Dimension C (Inch) | 0.48 |
| Dimension C (mm) | 12.1 |
| Hardened | Yes |
| Hole | ref. SAE J534 |
| International | SAE J534 |
| Material | Mild Steel |
| Spanner Wrench Size | 7/16" Hexagon |
| Thread | 1/8 x 27 Special Taper |
| Thread Type | Self-forming |
| Zinc Plating | Zinc Trivalent Passivate |
We're serious about support
If you need assistance in choosing the right Grease Fitting for your application or have questions regarding any of our products, please just get in touch.
We're serious about support
If you need assistance in choosing the right Grease Fitting for your application or have questions regarding any of our products, please just get in touch.
