3/16” Drive Fit No Ball Check Straight Grease Fitting 303 Stainless Steel
808009
Description
This drive fit straight grease fitting has a serrated shank without an undercut. The hole size is nominally 3/16″ dia. but must be determined in the application by the user.
Note excessive interference between the fitting and the hole may lead to a looser fit.
LOW-PRESSURE APPLICATIONS ONLY
This is an extremely SHORT drive fit used under low pressure and is NOT recommended for a hydraulic coupler which, when disconnected may dislodge the grease nipple.
Additional information
| Angle | Straight |
|---|---|
| Ball Check | No |
| Dimension A (Inch) | 0.39 |
| Dimension A (mm) | 9.9 |
| Dimension B (Inch) | 0.09 |
| Dimension B (mm) | 2.3 |
| Hardened | No |
| Hole | 3/16 nominal |
| Product Type | Hydraulic Grease Nipple |
| Material | 303 Stainless |
| Spanner Wrench Size | 5/16" Diameter |
| Thread | 3/16 Drive Fit |
| Thread Type | Drive |
| Zinc Plating | No |
We're serious about support
If you need assistance in choosing the right Grease Fitting for your application or have questions regarding any of our products, please just get in touch.
We're serious about support
If you need assistance in choosing the right Grease Fitting for your application or have questions regarding any of our products, please just get in touch.
